Fire Rebuild & Reconstruction in Pasadena
Fire rebuild and reconstruction in Pasadena, CA: steel gutters, metal covers and ember-resistant roof edges where a lot may sit in a mapped fire hazard zone.
Debris gathers in a roof gutter, and an ember that lands in it has dry fuel at the exact line where the roof meets the wall. For a Pasadena rebuild we specify steel gutters with metal covers, because vinyl softens and plastic mesh melts under heat. A Pasadena parcel that falls within a mapped fire hazard area can bring ember-resistance rules to the roof edge.
Steel at the roof edge
Gutters, downspouts and the hangers that hold them are all specified in steel or copper. A metal cover over the trough keeps leaves out and holds its shape if embers settle on it. The fascia behind the gutter should be noncombustible as well, since a gutter that survives does little good when the board behind it burns. Where an older house had decorative rafter tails or a wood cornice, we can copy the profile in a fire-resistant material, so the roofline still reads as the original and the roof edge still resists embers. Hangers are fastened into solid framing behind the fascia.
Rules that may apply to the lot
Inside a mapped fire hazard zone, extra requirements cover roof coverings, vents, eaves and the ground beside the walls. The reviewer at the city building department checks each of them on the plan set. Whether a given Pasadena parcel is mapped is worth confirming early, because the answer settles roof, vent and siding choices before the drawings are finished. The gutter detail goes on the roof sheet so the reviewer can find it quickly. Hangers are fastened into solid framing behind the fascia.
About our Fire Rebuild & Reconstruction serviceEverything we do in Pasadena
Fire Rebuild & Reconstruction in Pasadena: common questions
Reusable parts exist, though testing decides. Fire weakens concrete and reinforcing steel without showing it, so an engineer checks what is left of the foundation and walls. Each piece that earns a place in the new house is named in the written scope.
Largely, yes. Photographs, earlier permits and leftover details set the profile of the roof, windows and trim. On a mapped parcel the code may also alter vents, eaves and roofing, which are chosen to look right and resist embers.
Demolition and construction are permitted separately. The city building department examines the drawings and visits at set stages, and on a mapped parcel the drawings also show ember-resistant details. Your designer and we prepare the set, and we file it.
Fire Rebuild & Reconstruction in other cities
Talk to us about your house in Pasadena
Send the details and we will set up a walk-through and a written scope.