Sherman Oaks Office & Retail Renovation
Office and retail renovation in Sherman Oaks: saving an old terrazzo entry, reworking the threshold, phased work and LADBS permits for older buildings.
At the shop entrance, on the first site visit, a Sherman Oaks retailer may look down at the worn terrazzo and ask whether it has to go. If it is the original floor, it can usually be ground, patched and polished. The harder question is the step at the door: an accessible entry allows a change in level of no more than 1/2 inch, so the threshold may need reworking around the stone.
Saving the terrazzo
Terrazzo repairs start with matching the chips. We take a sample from a damaged corner, mix new matrix to match the color and aggregate, and fill cracks and holes before the whole surface is ground and sealed. A brass or zinc divider strip that has lifted is reset. Where a new doorway or a ramp has to cut into the floor, the cut edge is finished with a metal strip so the old pattern ends cleanly. Done this way, the entry keeps the material the building opened with, and customers walk in over the same floor the street has known.
Behind the counter
An older office or shop in Sherman Oaks can have a panel that is full, circuits with no ground and lighting that predates current controls. The renovation plan fits new circuits, data lines and LED fixtures into the walls and ceiling while they are open. Plans and inspections run through LADBS, which covers Sherman Oaks as one of the City of Los Angeles neighborhoods, and the final inspection checks the entry and restroom access along with the electrical work. Original wood trim taken down for the wiring goes back up afterward.
About our Office & Retail Renovation serviceEverything we do in Sherman Oaks
Office & Retail Renovation in Sherman Oaks: common questions
Yes, provided the original frame, bulkhead and entry floor are sound. We repair joints, replace cracked glass with safety glazing where it is required and grind and polish a stone or terrazzo threshold. Pieces too damaged to save are rebuilt to the same profile, so the front still reads as one.
Often it can. We fence off one area with a dust wall, keep the entrance and exit clear and move cutting and grinding to closed hours. Terrazzo grinding is wet and loud, so it is scheduled when the shop is shut, with the floor dry before opening.
Electrical service and wiring head the list, followed by heating and cooling matched to the new room plan, lighting controls and fire alarm devices that cover the changed rooms. If walls move, the sprinkler heads may need relocating, which the fire department reviews.
Office & Retail Renovation in other cities
Other work we do in Sherman Oaks
Talk to us about your house in Sherman Oaks
Send the details and we will set up a walk-through and a written scope.