Decks & Patios in Woodland Hills, CA
Decks and patios beside older Woodland Hills houses, built in an order that follows the inspection stops so hidden work is looked at before it is covered.
A Woodland Hills deck moves from one inspection stop to the next, and the order of work is built around them. Footing holes are looked at before concrete goes in, framing and connectors before any board covers them, and the final once guards and stairs are complete. Nothing hidden is buried until an inspector has seen it.
Holes, steel and concrete
The first physical work is layout and digging. Holes go to the depth on the drawings, past loose topsoil and into firm ground, then wait for the inspection stop. Steel bases or anchor bolts are set into the wet concrete, never drilled into cured piers afterward. Posts stay up off the concrete on metal standoffs so end grain does not sit in water. Only after the footings pass and cure do the posts and beams go up, and the crew keeps the stakes and string in place until that stop is signed off.
Frame, flash, then finish
The wall gets attention before the ledger does: siding is opened, membrane and flashing are installed, then the ledger is bolted over them. Joists follow, with hangers, tape on their top edges and blocking at the ends. This is the second stop, and the frame stays open and visible until it passes. Decking, rails and stairs come last, so the visible surface is the final layer. If rain is forecast, the framing is covered and the finish waits for a dry stretch.
About our Decks & Patios serviceEverything we do in Woodland Hills
Decks & Patios in Woodland Hills: common questions
Sequence protects the joint. The siding is opened first, then a membrane laps up the sheathing, then a metal flashing hooks behind the siding and over the ledger. The ledger is bolted through everything last. Runoff on the wall lands on metal and leaves the rim joist dry. A wall that cannot carry the load gets a free-standing frame.
In many cases, yes. Old paint on a porch can carry lead, so we test it before any scraping or grinding, and the sound parts get repaired while the unsound ones are replaced individually. Columns and brackets stay put. Any piece that has to be rebuilt is made to match the profile of the original.
LADBS issues it for raised decks and covers in Woodland Hills, and the permit sets the inspection stops along the way. We prepare the drawings and file them. A platform at grade can sometimes go without, and we check height and size to find out.
Decks & Patios in other cities
Other work we do in Woodland Hills
Talk to us about your house in Woodland Hills
Send the details and we will set up a walk-through and a written scope.